Home > Products > Anti-Surge Metal Film Chip Resistor > Surge-Resistant 1W Metal Film Chip Resistor - AEC-Q200 Qualified EGM Series 1206 Component

Surge-Resistant 1W Metal Film Chip Resistor - AEC-Q200 Qualified EGM Series 1206 Component

Category:
Anti-Surge Metal Film Chip Resistor
Payment Method:
T/T
EAM_Resist.pdf
Specifications
Package Size:
1206 (3.2×1.6mm)
Resistance:
Power Rating:
1W@25℃
Tolerance:
±1%
TCR:
±50ppm/℃
Surge Rating:
20A/10 μs
Highlight:

1206 1W Metal Film Chip Resistor

,

Surge-Resistant Metal Film Chip Resistor

Introduction
EGM16FT1R00DES – Surge-Resistant Metal Film Chip Resistor (1206 1R 1W)

EGM16FT1R00DES is a surge-rated metal film chip resistor from Ellon (亿能), part of the EGM series. Key parameters: 1206 (3216) package, 1R (1Ω), 1W@25℃, ±1%, ±50ppm/℃.

Part Number Breakdown
  • EGM: Anti-surge metal film series

  • 16: 1206 (3.2×1.6mm)

  • F: Standard termination

  • T: ±50ppm/℃ TCR grade

  • 1R00: 1Ω resistance code

  • DES: ±1% tolerance + tape/reel suffix

Key Characteristics

Standard 1206 thick-film resistors typically rate at 1/4W. EGM pushes 1206 1R 1W into the same footprint through:

  • Ni-Cr metal film instead of thick-film paste — conductive cross-section ~20% larger, thermal dissipation ~22% better than thick-film

  • Thickened Cu electrodes (45–50μm) + Al₂O₃ substrate, measured temperature rise ~28℃ at 1W full load

  • IEC 61000-4-5 surge compliance: 20A/10μs pulse, >100k cycles

  • AEC-Q200 qualified, RoHS / REACH compliant

Typical Applications
  • Industrial power / VFDs: IGBT emitter series resistor, snubbing switch transients while doubling as ±1% current sense

  • Outdoor LED drivers: primary current limiting after TVS stage

  • Automotive: OBC, ECU sensor conditioning, CAN termination (AEC-Q200 mandatory)

  • Industrial control: 24V PLC port limiting with TVS for EMC

  • New energy / appliances: BMS pre-charge, IPM snubber in inverter AC

Positioning vs. Competitors

In the 1206 1R 1W sub-segment:


Ellon EGM

Yageo AC / Tateyama TGL

Process

Metal film

Thick-film

1206 power

1W

0.25–0.5W

Surge

20A/10μs

10–15A

TCR

±50ppm

±100–200ppm

AEC-Q200

Yes

Partial

Price

~20% below JP brands

Close to EGM

EGM sits between "too weak" (thick-film 1206) and "too expensive" (alloy 1206). For PCB-area-constrained designs that still need surge rating + precision, it's the sweet spot.

Brand Note

Ellon (亿能) is a Taiwan-based passive component maker, with EGM / EAM / ELR as its three core resistor families. In mainland China, Shenzhen Shunhai Technology (深圳市顺海科技有限公司) is an authorized distributor for datasheets, samples and volume quotes. Online stock enquiry can also go through Huanian Shop (华年商城) at hnstshop.com, which carries the full EGM lineup (1206 / 1210 / 2010 / 2512).

📌 If you're evaluating 1206 1R 1W 1% 50ppm for a new design, EGM16FT1R00DES is worth a look — especially where AEC-Q200 and IEC 61000-4-5 surge rating matter. Contact Shunhai Tech or check Huanian Shop for lead time and MPQ pricing.

Send RFQ
Stock:
MOQ:
5000