CRH2512F5R60E04Z High-Power Thick Film Chip Resistor with 2W Rated Power, 5.6Ω Resistance in 2512 Package
CRH2512F5R60E04Z
,CRH2512F5R60E04Z Chip Resistor
,High-Power Thick Film Chip Resistor
CRH2512F5R60E04Z is a standard SKU from Ever Ohms' CRH Series (High-Power Thick Film Chip Resistors):
-
CRH – High-power thick film series, higher wattage than standard CR under the same footprint
-
2512 – Imperial package 6.4×3.2mm (metric 6432)
-
F – Tolerance ±1% (E96)
-
5R60 – Nominal resistance 5.6Ω (R = decimal point)
-
E04 – Tape & reel code, 4000 pcs/7″ reel
-
Z – RoHS / Lead-free eco suffix
Locked spec: 2512, 5.6R, ±1%, 2W, ±400ppm/℃, tape.
Standard 2512 thick film tops out around 1W. This 2512 5.6R 2W pushes to 2W@70℃ via enhanced Al₂O₃ substrate, optimized ruthenium-based paste, and extended back electrodes for lower thermal resistance.
| Parameter | Value |
|---|---|
| Package | 2512 (6.4×3.2×0.55mm) |
| Resistance | 5.6R (5.60Ω, E96) |
| Tolerance | ±1% |
| Rated Power | 2W @70℃ |
| TCR | ±400ppm/℃ |
| Operating Temp | -55 ~ +155℃ |
| Max Working Voltage | ~200V |
| Substrate | 96% Al₂O₃ ceramic |
| Compliance | RoHS / REACH halogen-free |
TCR ±400ppm isn't precision-grade, but it's fine for current sensing, limiting, and discharge where accuracy is secondary to power handling.
5.6Ω sits in E96 (non-E24), meaning it's chosen for current sense / divider / discharge rather than "any resistor will do":
-
SMPS & fast-charge adapters: DC-DC current limit, soft-start, gate resistors
-
BMS & battery packs: pre-charge, discharge paths—one 2W part instead of two 1206 1W in parallel
-
Industrial / servo: inverter bus balancing, sense-match before shunt
-
Appliances & lighting: LED driver sense, AC fan drive
One 2512 5.6R 2W replaces two 1206 1W parts → cleaner layout.
-
Double wattage in same footprint vs. generic 2512 (1W → 2W)
-
BOM consolidation — no parallel needed for medium-current sense
-
Cost-effective alternative to Vishay CRCW2512-HP / ROHM ESR
-
Stable availability — 5.6R is a stocked value in CRH2512 catalog
Ever Ohms (天二) carries a full line of thick film / thin film / alloy chip resistors; the CRH high-power series spans 0402–2512. CRH2512F5R60E04Z (2512 5.6R 2W) slots into the "mid-tier sense/limit" position in SMPS, industrial, and BMS — where imports are overpriced and 1W generics fall short.
-
Shenzhen Shunhai Technology (深圳市顺海科技有限公司) — authorized Ever Ohms distributor, CRH series in stock, supports BOM match and cross-reference
-
Huanian Mall (华年商城, dgphnst.com) — online catalog covers CRH/CR/VCR families with datasheets and small-lot ordering, handy for prototyping and EOL replacement lookup
Volume builds → direct from factory; prototypes / small batches → these two distributors keep lead time and unit price manageable.
