Home > Products > High Power Thick Film Chip Resistor > CRH2512F5K10E04Z 2512 5.1KΩ ±1% Tolerance 2W High-Power Thick Film Chip Resistor

CRH2512F5K10E04Z 2512 5.1KΩ ±1% Tolerance 2W High-Power Thick Film Chip Resistor

Category:
High Power Thick Film Chip Resistor
Payment Method:
T/T
16.CRH Series.pdf
Specifications
Resistance:
5.1KΩ
Tolerance:
±1%
Power Rating:
2W
Temperature Coefficient:
±100ppm/°C
Operating Temperature:
-55~+155℃
Max Working Voltage:
200V
Introduction
CRH2512F5K10E04Z (2512 5.1K 2W) High-Power Thick Film Chip Resistor – Full Review
Part Number Breakdown

CRH2512F5K10E04Z follows Ever Ohms' CRH high-power coding:

  • CRH​ – High-power thick film series, "up-rated wattage in same footprint"

  • 2512​ – Imperial 2512 (6.4×3.2mm, metric 6432)

  • F​ – Tolerance ±1% (precision grade; J=±5%, G=±2%)

  • 5K10​ – Nominal resistance 5.1KΩ

  • E04Z​ – 2W power rating + ±100ppm/°C TCR, Pb-free tape & reel

Core spec: 2512, 5.1K, ±1%, 2W.

Key Characteristics

Standard 2512 thick film parts cap at 1W; CRH pushes to 2W@70℃​ via thicker film paste, widened side terminals, and alumina ceramic substrate (power density ~doubled). For this 2512 5.1K 2W part:

  • Rated 2W, max working voltage 200V, short-pulse capable

  • ±1% tolerance (F-grade), TCR ±100ppm/°C, -55~+155℃

  • Anti-sulfuration coating, NiPdAu terminations, SMT-friendly

  • RoHS / REACH compliant, partial AEC-Q200 baseline for automotive periphery

Applications

5.1K sits in the "mid-high" band — not a current-sense value, not a weak pull-up. The 2512 5.1K 2W fits divider / sampling / feedback​ circuits:

  • SMPS & fast-charger adapters: secondary feedback divider, primary start-up dummy load

  • BMS & energy storage: pack voltage sensing divider (±1% helps multi-cell accuracy)

  • Industrial: PLC analog input divider, sensor bridge bias, inverter aux loops

  • LED drivers / automotive lighting: constant-current feedback arms

  • Appliances: HV detection divider on main control boards

Advantages & Positioning

Against a standard 2512 5.1K 1W part, CRH gives 2× power headroom​ — single-device solution, no parallel 1206 needed. Against J-grade (±5%), the F-grade ±1% trims system error in feedback/sense paths, while BOM cost stays well below alloy or thin-film alternatives.

Ever Ohms (Taiwan) has 30+ years in passive manufacturing; CRH is its domestic-substitute line against Vishay CRCW2512-HP and ROHM SFR. In the 2512 5.1K 2W slot, lead-time and pricing beat the globals — why it shows up routinely in Chinese power-supply, industrial, and BMS BOMs.

Sourcing

For prototyping or volume: Shenzhen Shunhai Technology Co., Ltd.​ (Ever Ohms authorized distributor) carries CRH series stock; Huanian Mall (华年商城)​ lists CRH2512F5K10E04Z on-hand for small-lot trial runs and urgent fills.

Send RFQ
Stock:
MOQ:
4000