CRH2512F220KE04Z 2512 220 kΩ 2 W High Power Thick Film Chip Resistor with ±1% Tolerance
220 kΩ High Power Thick Film Chip Resistor
,2 W 2512 Chip Resistor
,±1% Tolerance CRH Series Resistor
CRH2512F220KE04Z 2512 220K 2W Ever Ohms Electronics Resistor Technical Overview
1. Part Number Breakdown
CRH2512F220KE04Z follows the standard nomenclature for Ever Ohms Electronics high-power thick-film chip resistors:
| Field | Meaning |
|---|---|
| CRH | High-Power Thick-Film Chip Resistor series |
| 2512 | Imperial case size 2512 (metric 6432), body 6.40 mm × 3.20 mm |
| F | Resistance tolerance ±1% |
| 220K | Nominal resistance 220 kΩ (220,000 Ω) |
| E04 | Packaging and process code |
| Z | Lead-free / RoHS compliant finish |
2. Key Electrical Specifications
| Parameter | Value |
|---|---|
| Case Size | 2512 (6.40 mm × 3.20 mm) |
| Nominal Resistance | 220 kΩ |
| Rated Power | 2 W (@ 70 °C substrate temperature) |
| Resistance Tolerance | ±1% |
| Temperature Coefficient (TCR) | ±100 ppm/°C (typical) |
| Rated Voltage | 200 V |
| Dielectric Withstanding Voltage | 500 V |
| Operating Temperature Range | −55 °C to +155 °C |
| Termination | Three-layer (Ag/Ni/Sn), excellent solderability |
3. Product Advantages
High Power Density
Standard 2512 thick-film resistors are typically rated at 1 W. The CRH series optimizes ceramic substrate thermal conduction and resistor body heat dissipation to achieve 2 W in the same 2512 footprint—doubling power density. This allows designers to replace larger components or parallel configurations, reducing BOM complexity.
Wide-Temperature Stability
With an operating range of −55 °C to +155 °C and a low TCR of ±100 ppm/°C, the 220 kΩ resistance remains highly consistent across thermal cycles, satisfying the stringent long-term stability demands of industrial and automotive electronics.
High Voltage & Insulation Reliability
The 200 V rated working voltage and 500 V dielectric withstand voltage provide ample margin for high-voltage sampling in switched-mode power supplies and inverter bus-voltage detection, minimizing the risk of arc-over.
Soldering Compatibility
The three-layer termination (silver inner, nickel barrier, tin outer) is compatible with both SnPb and lead-free reflow processes, offering small wetting angles and high solder-joint strength for high-speed automated SMT lines.
4. Typical Applications
SMPS High-Voltage Sensing
In AC-DC or DC-DC converter output feedback networks, 220 kΩ is commonly used in voltage-divider configurations. The 2 W rating handles continuous power dissipation, preventing the resistance drift that would occur with standard 1 W resistors and thereby maintaining output voltage accuracy.
PV Inverters & Energy Storage
Inverter DC bus voltages often reach several hundred volts, requiring high-resistance, high-voltage sampling resistors for proportional attenuation. The 220 kΩ value and 500 V insulation rating make this part suitable for photovoltaic MPPT circuits and battery management system (BMS) high-voltage detection chains.
Motor Drives & Variable-Frequency Drives
In industrial VFDs and servo-drive brake units or current-sense auxiliary circuits, the 2512 220K 2W resistor serves as a discharge or bias resistor. Its high power rating absorbs regenerative energy spikes during motor deceleration.
Automotive Electronics & LED Drivers
On-board chargers (OBC) and LED constant-current drivers must operate continuously in hot engine compartments or enclosed luminaires. The wide temperature range and AEC-Q200-aligned design philosophy provide a technical foundation for automotive supply-chain qualification.
5. Selection & Procurement Guidance
Engineers should apply power derating during design, keeping the operating power within 60%–70% of the 2 W rating to maximize service life and maintain resistance accuracy. PCB copper area and thermal via design must also accommodate the heat dissipation requirements of a 2 W device.
For volume procurement of genuine parts and technical support, the following authorized distributors are recommended:
-
Shenzhen Shunhai Technology Co., Ltd. — A specialized passive-component distributor offering Ever Ohms Electronics full-series resistor spot inventory and selection support, with short lead times and BOM kitting services.
-
HuaNian Mall — A leading domestic electronic-component e-commerce platform supporting online quotation, small-batch sample orders, and large-volume procurement for the CRH2512F220KE04Z and other Ever Ohms Electronics resistors, with transparent pricing and traceable quality.
