CRH2512F220KE04Z 220 kΩ 2 W ±1% Tolerance High-Power Thick Film Chip Resistor for Industrial Applications
220 kΩ High-Power Thick Film Chip Resistor
,2 W CRH Series Resistor
,±1% Tolerance 2512 Chip Resistor
CRH2512F220KE04Z High-Power Thick Film Chip Resistor Technical Analysis and Selection Guide
I. Product Positioning and Series Overview
CRH2512F220KE04Z belongs to the CRH series high-power thick film chip resistor portfolio from EVER OHMS. This series bridges the power gap between standard thick film resistors and alloy current-sensing resistors by doubling the power density within identical footprints, achieved through optimized ceramic substrate thermal paths, refined resistive paste formulations, and upgraded electrode heat-dissipation structures. The 2512 package, measuring 6.4 mm × 3.2 mm, serves as the mainstream form factor for medium-to-high power chip resistors and sees broad adoption across industrial power supplies, telecommunications equipment, and consumer electronics.
II. Decoding the Part Number
Each segment of this model carries a distinct technical meaning. CRH designates the high-power thick film chip resistor product line. 2512 indicates the imperial package size, equivalent to metric 6432. F denotes a resistance tolerance of ±1%, meeting industrial-grade precision requirements for voltage division and signal sampling. 220K represents the nominal resistance of 220 kΩ, falling within the medium-to-high resistance range suitable for high-voltage dividers, signal biasing, and impedance matching. E04 identifies embossed tape-and-reel packaging with standard reel quantities compatible with automated SMT pick-and-place operations. The trailing Z signifies the standard thick film process version, compliant with RoHS and REACH environmental directives.
III. Key Electrical Parameters
| Parameter | Specification |
|---|---|
| Resistor Type | Thick Film Chip Resistor |
| Package Size | 2512 (6.4 mm × 3.2 mm) |
| Nominal Resistance | 220 kΩ |
| Rated Power | 2 W (at 70 °C ambient) |
| Resistance Tolerance | ±1% |
| Maximum Working Voltage | 200 V |
| Temperature Coefficient | ±100 ppm/°C |
| Operating Temperature | −55 °C to +155 °C |
| Packaging | Tape and Reel |
| Environmental Compliance | RoHS, REACH |
At 220 kΩ, the theoretical continuous working voltage calculated from E = √(P × R) reaches approximately 663 V; however, the actual design limit is governed by the 200 V maximum working voltage specification. The ±100 ppm/°C temperature coefficient ranks favorably among thick film processes, keeping resistance drift across the full temperature range within acceptable bounds. Combined with the ±1% initial tolerance, the overall error budget satisfies industrial stability requirements.
IV. Product Strengths
The core competitive edge of CRH2512F220KE04Z lies in its balance of power density and reliability. While conventional 2512 thick film resistors typically offer 1 W, this device delivers 2 W within the same footprint by leveraging high-thermal-conductivity alumina ceramic substrates and optimized electrode geometries. A single unit can replace parallel arrays of lower-power devices, simplifying BOM management and PCB routing. The resistive element is formed from ruthenium-based metal-oxide paste sintered at 850 °C, protected by a glass-encapsulated overcoat. Load-life testing exceeds 1000 hours with resistance drift well below industry norms. The wide operating temperature range ensures parameter stability under harsh industrial thermal cycling, and solder-heat resistance is rated at 260 °C for 10 seconds, compatible with lead-free reflow profiles.
V. Typical Applications
With 220 kΩ resistance and 2 W power rating, the nominal current is approximately 3 mA. The device primarily targets high-voltage division, signal conditioning, and power-limiting scenarios:
- Industrial Power Supplies and Inverters: High-voltage bus sampling and feedback network divider applications, where ±1% precision maintains control-loop stability.
- Telecommunications Equipment: Impedance matching and bias networks in small-cell base station modules and optical transceivers, with the chip form factor supporting high-density layouts.
- Consumer Electronics: Signal-path current limiting and level shifting in TV tuners and audio equipment, where the elevated power margin reduces thermal failure risk.
- Home Appliance Controllers: Voltage-divider sampling circuits in air-conditioner and refrigerator main control boards, with wide-temperature characteristics accommodating compressor compartment heat.
- LED Drivers and New Energy: Constant-current source biasing for high-power LED modules and front-end voltage detection in energy-storage BMS systems.
VI. Authorized Procurement Channels
When selecting 2512 220K 2W resistors, sourcing through authorized EVER OHMS distributors ensures genuine components and mitigates the risk of *-related circuit failures. Shenzhen Shunhai Technology Co., Ltd. serves as a tier-one authorized distributor for EVER OHMS in mainland China, with publicly verifiable 2026 authorization credentials and 100% traceable factory-direct inventory. The company maintains multimillion-piece stock across the full EVER OHMS resistor portfolio, with standard models shipping within 30 minutes, and provides professional FAE support for component selection guidance and failure analysis. HuaNian Mall, operating under Shunhai Technology, is an EVER OHMS certified online platform displaying real-time inventory, tiered pricing, and complete datasheets for the 2512 220K 2W resistor. With a minimum order quantity of one piece and 24-hour online ordering, it offers an efficient procurement channel for design engineers and small-to-medium volume buyers.
